Breville the Bakery Chef Hub LEM750, Instruction Book

Page: 16 / 28

16
11. When mixing is complete, turn the speed
control dial to the OFF (0) position, switch
the mixer off at the power outlet and remove
the power cord from the outlet.
12. Remove the mixing bowl and mixing
accessory from the mixer body.
WARNING
After mixing, remove the mixing accessory
with care as it may be hot after use.
COUNT-UP TIMER
The count-up timer is for gauging mixing time,
making it easier to repeat the results.
The timer will automatically begin counting up
as soon as the dial is turned to one of the speed
settings.
When the dial is pushed to PAUSE, the current
mixing time will flash on the until mixing is
resumed or 5 minutes, whichever comes first.
When the dial is turned to OFF (0), the LCD
will reset back to 0:00.
The maximum count up time is 60 minutes.
When the timer goes beyond 9:59, it counts
in whole minutes. Turn the speed control dial
back to the OFF (0) position to reset.
COUNT-DOWN TIMER
The count-down timer is for any recipe that
specifies the length of time ingredients should
be mixed. The maximum count-down time is
60 minutes.
To set the count-down timer, press the up or
down arrows until the desired mixing time is
displayed on the LCD screen. Press and hold to
scroll more quickly.
Rotate the speed control dial to select the
desired speed and begin mixing. When the
timer has finished counting down, it will beep,
the mixer will automatically turn off and the
timer will flash 'OFF'.
The control dial must to be rotated to the OFF
(0) position to reset the timer and to continue
mixing.
CONTROLLED SOFT START
This bench mixer is equipped with a controlled
soft start feature, even when using PAUSE
mode. The mixing action on any speed setting
will start in a controlled manner before moving
to the chosen speed.
It is still recommended to first start mixing on
a lower speed, then increase the speed control
dial when operating.
PRESS TO PAUSE - PRESSING THE
SPEED CONTROL DIAL
At any stage during mixing (either count-up
or count-down), press the speed control dial
inward once to pause. This will pause the mixer
and hold the current time on the timer. The
light on the timer will flash.
Add additional ingredients as needed. To
continue operation, simply press inward on the
control dial again. The timer will continue to
count up or down, depending on the selection.
Turn the dial to the OFF (0) position to reset
the timer.
PAUSE MODE - TILTING UP THE
MIXER HEAD
The mixer will pause automatically whenever
the mixer head is lifted. To resume mixing,
place the motor head down within 5 minutes
and move the dial up or down one speed and
the mixer will continue operation, with the
timer continuing to count up or down.
If the mixer head is lifted for over 5 minutes
before returning to horizontal, the mixer will
reset the timer to 0:00. Turn the speed control
dial to the OFF (0) position to reset.
OVERLOAD PROTECTION SYSTEM
The motor in this bench mixer is protected
from burning out by a manual reset cut-out
switch. If the bench mixer is overloaded or
operated continuously for too long, the motor
may overheat and stop.
To operate the mixer again, turn the speed
control dial back to the OFF (0) position, turn
the mixer off and unplug from the power outlet.
LEM750_ANZ_IB_A20.indd 16 5/8/20 12:37 pm