4
• Do not operate the purifier
fan heater with a damaged
cord or plug, or if the purifier
fan heater has been dropped
or damaged in any matter,
return the purifier fan heater
to your nearest Breville service
centre for examination,
electrical or mechanical
adjustment or repair.
• Do not operate the purifier
fan heater with the power
cord damaged, frayed or split,
wound around any part of
the purifier fan heater, or in
contact with heated surfaces
of the heater.
• Do not run the cord under
carpeting or cover the cord
with rugs, runner of the like.
Arrange the cord away from
traffic areas and where it will
not be tripped over.
• Do no locate the purifier fan
heater immediately below
socket outlet when in use.
• Do not use this purifier fan
heater with a programmer,
timer or any other device
that switches the purifier fan
heater on automatically since
a fire risk may exist if the
purifier fan heater is covered
or positioned incorrectly.
• This purifier fan heater is not
intended for use in wet or
moist locations.
• To disconnect the purifier
fan heater, switch the power
switch to OFF, then switch
off at the power outlet then
remove plug from the outlet.
• Do not insert or allow foreign
objects to pass through the
inlet or outlet openings.
This may cause an electric
shock, fire or damage the
purifier fan heater.
• To prevent a possible fire or
heat damage, allow ample
space around the purifier fan
heater (at least 1.7m at the
front, 0.5m at the rear, top
and sides) and do not totally
or partially block the air inlet
or outlets in any manner.
Check the openings from
time to time for accumulated
dust. Ensure long shag carpet
does not obstruct airflow
under the unit.
• Do not touch hot surfaces
or the front grill when
in operation or for some
time after, as these
surfaces may be hot.
• Switch the purifier fan heater
to OFF, then turn off at the
power outlet and unplug.
Allow the purifier fan heater
to cool down before cleaning
or storing.
LPH708_ANZ_IB_B21_FA.indd 4
LPH708_ANZ_IB_B21_FA.indd 4
29/1/21 11:04 am
29/1/21 11:04 am
