background image

10

WHAT IS THE AIRROUNDER PLUS™ 
CONNECT PURIFIER FAN HEATER?

The Breville AirRounder Plus™ Connect 
purifier fan heater features an air purifier, 
heater and cooling fan in one. 
The Purifier improves your indoor air quality 
using 3 distinct levels of protection.

1. A Pre-Filter

Captures larger airborne particles such as 
human hair, pet dander and dust particles.

2. A True HEPA Filter

Traps up to 99.97% of fine particles, allergens 
and airborne contaminants down to 
0.3 microns in size. These include bacteria, 
viruses, mould spores, plant spores, and pollen.

3. An Activated Carbon Membrane

Along with assisting in the capture of dust, 
smoke, pollen and other airborne allergens, the 
activated carbon membrane helps to neutralise 
odours in the home and to eliminate fumes 
emitted by household products as well as 
other volatile organic compounds (VOC’s) that 
might be found in the air.

Heating/Cooling Light Ring

Your purifier fan heater is fitted with a light 
ring that surrounds the head of the purifier 
fan heater that illuminates a blue colour when 
in cooling mode and a red colour when in 
heating mode.  

The light ring can be switched off at any time. 
Touch and hold the   button on the control 

panel for 3 seconds to turn off the light ring 
in any mode.

NOTE

The heating/cooling light ring should not be 
confused with the air quality light indicators on 
the control panel.

SAFETY FEATURES

Safety Tip-Over Cut-Out Switch

There is a tip-over switch inside the purifier 
fan heater. 
If the purifier fan heater is accidentally tipped 
over, the purifier fan heater will stop operating. 
Once placed back into the upright position, the 
purifier fan heater will switch on again.

THERMOSECURE™ Protection

Your purifier fan heater is fitted with a safety 
device that switches off the purifier fan heater 
in the event of overheating. Should this purifier 
fan heater stop working, turn off the purifier 
fan heater and inspect the air inlet and outlet 
for blockages. Wait until the purifier fan heater 
is fully cooled for the protection system to reset 
before attempting to restart the purifier fan 
heater. If the purifier fan heater fails to operate 
or the safety device switches off again, take the 
purifier fan heater to an authorised Breville 
Service Centre for examination or repair.

Features

LPH708_ANZ_IB_B21_FA.indd   10

LPH708_ANZ_IB_B21_FA.indd   10

29/1/21   11:04 am

29/1/21   11:04 am

Summary of Contents for the AirRounder Plus LPH708

























Reviews: