11
Assembly
BEFORE FIRST USE
•
Remove and safely discard any packaging
material or promotional labels attached to
your purifier fan heater and filter. Check for
any missing or damaged parts as per the
components list.
•
Remove the filter from the purifier fan heater
(see REPLACING THE FILTER on page 19)
and take it out of the plastic bag. Then re-
insert the filter into the purifier fan heater.
•
Select a flat and level location for the
purifier fan heater
•
For proper air flow, locate the unit at least
20cm from any wall or furniture.
•
Ensure the air inlet and outlets are not
blocked before use.
•
Ensure the filter has been fitted correctly as
per the instructions in this book.
•
Plug the power plug into a 230V or 240V
power outlet and turn on the power outlet.
WARNING
Remove the filter packaging before first use.
IMPORTANT
When moving the purifier fan heater, always
lift the unit using two hands and set down
gently on a flat and level surface.
LPH708_ANZ_IB_B21_FA.indd 11
LPH708_ANZ_IB_B21_FA.indd 11
29/1/21 11:04 am
29/1/21 11:04 am