12
cleaning
Make sure the unit is switched off and unplugged from the mains supply socket
before cleaning. The blending blades are very sharp, take extreme caution when
washing the jug. Do not immerse the motor base, mains lead or plug in water or
any other liquid.
Cleaning
•
Wash the jug, jug lid and stopper in warm, soapy water. Rinse and dry thoroughly.
If necessary, use a washing up brush to get rid of any stubborn food deposits
which have stuck around the blade. Alternatively, these items can be washed in a
dishwasher.
•
Wipe down the motor base with a damp cloth and dry thoroughly. A mild detergent
solution may be used if required.
Quick cleaning method
1.
Half fill the blender with warm (not hot) water and a small amount of detergent.
2. Hold the speed control in the PULSE position for 10-20 seconds.
3. Remove the jug and rinse it under running water.
s
E
O
L
C
s
E
O
L
C
Ridged
surface
uppermost
To remove the blades for cleaning
1.
Place the blender jug upside down on a flat, dry surface such as a kitchen worktop.
Turn the blade assembly clockwise to loosen it. Carefully lift the blade assembly out
of the blender jug.
2. Lift off the rubber seal from around the blade assembly. Clean the blade assembly
and jug with warm soapy water or in a dishwasher.
3.
Refit the rubber seal around the with its ridged surface facing up. Fit the blade
assembly into the blender jug.
Turn the blade assembly anticlockwise as far as it
will go. This will ensure that the seal is correctly compressed and the jug will
not leak during use.
Summary of Contents for pro kitchen
Page 1: ...selection of recipes included...
Page 7: ...7...
Page 16: ...93389 2 VBL065_Iss_3 10 13...