The safety reset button has been added to the
blender to preserve the motor life.
The switch will be activated when the
motor becomes too hot, or the load too heavy.
The unit will cease to operate. The switch
located under the motor base will need to be
reset by depressing the red button, this can
only take place after 10 minutes. The motor
will need to rest for 10 minutes before
blending can resume.
•
•
To clean the blender jug, particularly
when a variety of food has been used, half
fill the jug with luke warm water and a
small amount of detergent. Switch either
of the speed control buttons (1 or 2) and
operate briefly. Switch the blender off,
remove the blender jug from the motor
base. Rinse and dry thoroughly.
•
•
Remove the lid and inner lid and wash in
warm soapy water.
•
•
Switch the blender OFF, then switch the
power off at the power outlet and remove
the plug, then wipe the motor base with a
soft, damp cloth.
DISASSEMBLING THE BLENDER
FOR CLEANING
Step 1.
To unlock the jug from the blender base, turn
the jug anticlockwise to the unlock position,
and lift jug from blender.
Step 2.
Turn jug anticlockwise to the unlock position
and unscrew locking ring with force.
Step 3.
Remove locking ring from blender jug.
CARE AND CLEANING
MOTOR PROTECTION BUTTON (RESET BUTTON)
11
10
Never immerse the motor
base in water or any
other liquid.
Reset Button
BR4860 CBL25 Book Revision.qxd 14/1/04 10:30 AM Page 10