OPERATING YOUR BREVILLE BLENDER cont’d
8
DO
•
•
Low speed is best for dressings,
marinades and foods that require mixing
until just combined, such as batters.
•
•
Use the pulse button for emulsions such
as mayonnaise.
•
•
High speed is best for pureeing or
cocktail making.
•
•
Use PULSE for foods that only require short
bursts of power such crushing ice and nuts.
•
•
Ensure all parts have been thoroughly
washed and dried before assembly.
•
•
Ensure the blender is correctly assembled
before operating (see page 7).
•
•
Ensure base of jug is thoroughly dry before
placing onto blender base before use.
•
•
Ensure the blender is placed on a clean,
dry surface to operate.
•
•
Liquids should be placed into blender
before solid ingredients, except where
specified in recipes.
•
•
All foods should be cut into cubes
(approx. 2-3cm square) to achieve an
even result.
•
•
When required use a plastic or rubber
spatula to wipe food down sides of jug
only when blender is in the OFF position
and has been switched off at power
outlet. Ensure blades have stopped
rotating. Do not use metal utensils as
they may damage the blades or jug.
•
•
Do hold the lid down when starting to blend.
DON’T
•
•
Do not blend dry, thick or heavy mixture
for more than 60 seconds without turning
off the blender and stirring the ingredients,
and then continue blending. For normal
blending tasks, eg. Mayonnaise, dressings
etc., do not operate for longer than 3
minutes at one time.
•
•
Do not place any objects, other than food,
into the jug whilst the motor is running.
•
•
Do not use the jug to store food.
•
•
As air does not circulate when blending,
the blender will not beat egg whites, knead
dough or mash potatoes.
•
•
Do not remove the jug while the blender is
operating. Always switch off at the power
outlet before removing jug.
•
•
Overloading the blender with more than
the specified quantity could cause the
motor to stall, turn the blender OFF,
unplug from power outlet and remove a
portion of the mixture before continuing.
•
•
Do not operate the blender continuously
on heavy loads for more than 3 minutes.
TIPS ON HOW TO BEST USE YOUR BREVILLE BLENDER
9
Step 4.
Add food or liquid into the blender jug and
place the lid firmly into position on the top of
the jug.
Step 5.
Then, plug into a 230/240v power outlet and
switch on.
Step 6.
Set the speed by lifting the speed control
switch to desired setting “1” or “2”. The
speed can be changed at any time during the
blending process.
For ingredients that require short bursts of
power, push the ‘Pulse’ button. This is ideal
for crushing ice and nuts.
Step 7.
During the blending process, you may find
that ingredients stick to the sides of the
blender jug. To push the food back onto the
blades, turn switch to the OFF position and
switch off at the power outlet. Use a plastic
spatula to scrape down the sides of the jug
before recommencing blending.
ALWAYS HOLD THE LID DOWN WHEN STARTING TO BLEND.
If any moisture or liquid
appears on top of the motor
base, wipe immediately
with paper towelling.
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE
BLENDER WHILST THE MOTOR IS RUNNING.
When starting to blend,
firmly hold the blender lid
into place. (see fig 5)
fig 5
BR4860 CBL25 Book Revision.qxd 14/1/04 10:30 AM Page 8
