7
ADJUSTING THE GRIND
The Salt & Pepper Mills have adjustable
grind control, allowing the ground results to
be fine or coarse to suit your preference. The
grind control knob can be found at the base
of the grinder where the ground salt/pepper
falls from.
For a finer grind, turn the grind control knob
in a clockwise direction.
For a coarser grind, turn the grind control
knob in an anti-clockwise direction.
NOTE
Do not turn the grind control knob more
than 5 full rotations. Doing so will unscrew
the grind control knob from other internal
components.
OPERATING THE MILLS
When using the Salt & Pepper Mills,
ensure that the base storage cover has
been removed.
Hold the mill directly over the food to be
seasoned, press and hold the one touch
operation button at the top of the mill.
While the mill is operating, the light at the
base of the grinder will illuminate.
To stop grinding, release the one touch
button.
If the salt and pepper grinder is no longer
needed, replace the base storage cover onto
the mill.
WARNING
Do not use the Salt & Pepper Mills over
cooking. Moisture from the steam can clog
the mills grinding mechanism.
Care & Cleaning
To clean the outside of the Salt & Pepper Mills,
wipe the stainless steel housing with a soft,
damp cloth and dry thoroughly.
Do not use steel wool , scouring pads or
abrasive cleaners on the Salt & Pepper Mills,
as they will damage the stainless steel housing.
To clean the inside of the salt and pepper
compartment, empty out the contents of the
compartment and use a dry pastry brush or
another small brush to clear out any remaining
salt or pepper.
NOTE
Do not immerse the Salt & Pepper Mills in
water or any other liquid.
STORAGE
The Salt & Pepper Mills should be stored in a
dry and cool location. This will help to prevent
the contents from clumping.
Ensure that the base storage cover is attached
to the base of the mill before storing.
If the Salt & Pepper Mills are not being used
for an extended period of time, the batteries
should be removed.
