14
Troubleshooting
PROBLEM
EASY SOLUTION
Motor doesn’t start or blade
doesn’t rotate
•
Check that the blender jug is securely locked into position.
•
Check that the blade assembly is correctly attached to the base of
the blender jug.
•
Check that the POWER button and selected function or speed
setting is illuminated.
•
Check that the power plug is securely inserted into the power
outlet and switched on.
Food is unevenly chopped
•
Either too much food is being blended at one time or the pieces are
too large.
•
Try cutting food into smaller pieces of even size and processing a
smaller amount per batch.
•
For best results, the food should be chopped into pieces no larger
than 2cm.
Food is chopped too fine or is
watery
•
The food is over processed. Try using the ICE/AUTO PULSE
function or process for a shorter time.
Food sticks to blades and jug
•
The mixture may be too thick. Try adding more liquid to the
mixture and/or use another function
Overload blender
•
The motor is protected from burning out by an automatic,
temperature operated, cut-out switch.
•
If the blender is overloaded or operated continuously for too long,
the motor may overheat. If this happens, the buttons will start to
flash and the safety cut-out switch will prevent the blender from
operating. To operate the blender again, you must switch off at
the power outlet, unplug and allow to cool for approximately
30 minutes. Once the motor has fully cooled, it is ready for use
again.
Summary of Contents for Kinetix Pro BBL800/C
Page 1: ...the Kinetix Pro blender Instruction Book BBL800 C BBL801...
Page 15: ...15...
