Breville Kinetix Pro BBL800/C, Instruction Book

Page: 8 / 16

8
Assembly
BEFORE FIRST USE
Before using your Breville product for the first
time, remove any packaging material and
promotional labels. Ensure the appliance is
switched off at the power outlet and the power
cord is unplugged.
Wash the lid, inner lid, blender jug and blade
assembly (refer to Disassembling the blender)
of the Breville product in warm, soapy water
with a soft cloth. Rinse and dry thoroughly.
The motor base can be wiped with a damp
cloth. Dry thoroughly.
The lid, inner lid, blade assembly and silicon
seal may be washed in the dishwasher in the
top shelf only on a standard wash.
The blender jug may be placed in the bottom
shelf.
NOTE
Ensure that the silicon seal is carefully placed
completely around the blade assembly, prior
to inserting into the jug, as this will prevent
leakages.
1. To assemble the blender jug, place the
silicon seal onto the blade assembly.
2. Turn the blender jug upside down and
insert the blade assembly into the jug base.
3. Turn the blade removal system
anticlockwise until firmly screwed into
position.
4. Place the motor base on a flat, dry surface
such as a bench top. Ensure that the motor
base is switched off at the power outlet
and the power cord is unplugged. Turn the
blender jug upright and insert onto the
motor base. The handle of the blender jug
can be positioned to the left or right hand
side of the appliance.
5. Plug the power cord into a 230/240v power
outlet and switch on.