99
9
Anti-calc system
The anti-calc cartridge should be
replaced when the ‘change cartridge’
indicator illuminates. If a new
cartridge is not immediately available,
you may continue ironing, using
distilled water in place of tap water.
IMPORTANT
When the anti-calc
cartridge is exhausted, do
NOT continue to use the iron
with tap water as this may
damage the iron.
NEVER attempt to use the
iron without the anti-calc
cartridge in place.
Replacing the anti-calc
cartridge
1
Switch off and unplug the steam
generator at the mains supply.
2
Remove the water tank, by
pressing the release button
located on the underside of the
tank. (Fig 1).
NOTE
:
The cartridge will contain a
small amount of water. Keep
the cartridge tilted upwards to
minimise dripping from the
connecting tube.
3
Lift the anti-calc cartridge from
the water tank and dispose in
the household waste (Fig 2).
Fig 2
USING YOUR IRON
4
It is recommend that you empty
and refill the water tank with cold
water at this point. Do not fill the
water tank above the ‘MAX’ mark.
5
Insert the new cartridge into the
top of the water tank. Push the
cartridge down, ensuring the
water-outlet rests in the recess
on the water tank.
6
Insert the tank into the base unit,
ensuring that it latches securely
into place.
Resetting the Anti-calc system
after replacing the cartridge
1
Switch off and unplug the steam
generator at the mains supply.
2
Whilst pressing and holding the
Power on/off button
and
the
Steam level selector, plug the
steam generator back into the
mains supply.
3
Release both buttons.
4
This will reset the Anti-calc
system and the ‘change
cartridge’ indicator will turn off.
Fig 1
Release Button