8
8
Adjusting the amount of steam
1
The steam setting defaults to
LOW
each time the iron is
switched on. The LOW steam
indicator will be illuminated.
2
Press the steam level selector
button
ONCE
for
MEDIUM
steam.
The MED steam indicator will be
illuminated.
3
Press the steam level selector
button
TWICE
for
MAXIMUM
steam. The MAX steam indicator
will be illuminated.
4
Press the steam level selector
button
THREE TIMES
to switch the
STEAM OFF
. The MAX, MED and
LOW steam indicators will be
extinguished.
•
Press the steam level selector
button again to repeat steps 1-4.
Dry ironing
You may see this ‘Do not
steam’ symbol on certain
delicate fabrics.
If you intend to dry iron fabrics,
there is no need to fill the water
tank. However, if water is already
in the water tank, you do not need
to empty it.
1
Press the temperature / standby
select button to set the soleplate
to the desired temperature.
2
Press the steam level selector
button until the MAX, MED and
LOW steam indicators are all off.
3
Iron your clothes as usual.
USING YOUR IRON
Auto Off function
If the steam button is not pressed for
more than 20 minutes, you will hear
two beeps. The iron then enters
‘sleep’ mode, whereby the iron and
the lights are switched off.
Press the ON/OFF button to switch the
iron and the lights on again.
WARNING!
ALWAYS turn the iron off
and disconnect from the
power source after use.
NEVER leave the iron
unattended with the Auto Off
function in operation.
