Breville instant cappuccino, Instruction Booklet

Page: 8 / 20

If the machine is not already on - plug the unit into the mains and switch on. Press the
power on/off button.
The power/ready indicator will light up orange. After approximately 5 minutes the power/
ready indicator will change to green/orange to indicate that it is ready.
1. Open the coffee chamber cover and remove the coffee funnel dispenser. Wash the
coffee funnel dispenser in warm soapy water, rinse and dry.
2. Place the cleaning jug under the cappuccino nozzle.
3. Empty any remaining milk from the milk tank and add clean water up to the 4 cup
mark. Place on the unit ensuring the tank is pushed fully back on the unit.
4. To start cleaning turn the control dial anticlockwise to the CLEAN/GO! position.
5. Clean water is flushed through the machine into the cleaning jug.
6. When all of the water from the milk tank has flushed through, turn the control
dial clockwise to the STOP position. A small amount of water will continue to be
dispensed.
7. Remove and empty the cleaning jug.
8. Remove and clean the tray from the rear of your instant cappuccino maker and wash
it in warm soapy water.
9. Lift out the drip tray and cover using the tabs. Lift the cover from the drip tray and
wash both parts in warm soapy water. Dry and replace the drip tray and cover before
next use.
Your instant cappuccino is now clean.
If you want to empty the water tank please follow the steam release procedure.
If the machine has not been used for a long time, or it is excessively dirty, we recommend
that bicarbonate of soda is mixed with the water at step 3 to assist the cleaning process.
If bicarbonate of soda has been used, flush the system again with clean water to remove
any residue.
The coffee funnel dispenser, dispensing nozzle, milk tank, cleaning jug, drip tray and
cleaning tray can be cleaned in a dishwasher.
8
cleaning