14
15
oPERAtING yoUR BREvILLE PRodUCt
MANUAL SHot voLUME
Manually control low pressure
pre-infusion time and shot volume without
re-programming the pre-set shot volume.
•
Press and hold the 1 CUP or 2 CUP
button. The extraction will enter low
pressure pre-infusion until the button is
released
•
When the 1 CUP or 2 CUP button is
released, extraction will continue at full
pressure.
•
Press the 1 CUP or 2 CUP button again
once the desired volume of espresso has
been extracted
MANUAL ESPRESSo
Press and hold the 1 CUP or 2 CUP button.
Release the button once sufficient espresso
has been extracted into the cup.
OR
NotE
For optimal flavour when using a
1 CUP filter, you should extract approx.
30ml. When using a 2 cup filter, you
should extract approx. 60ml.
WARNING
The metal parts of the portafilter will
be very hot.
ESPRESSo PRESSURE GAUGE
LoW PRESSURE PRE-INFUSIoN
The gauge needle will be positioned in
the pre-infusion zone at the start of the
extraction indicating the machine is in
low pressure pre-infusion mode.
The low pressure pre-infusion gradually
increases water pressure to gently expand
grinds for an even extraction before
increasing to full pressure.
IdEAL ESPRESSo ZoNE
During extraction, the gauge needle when
positioned in the middle zone, indicates
the espresso will be extracted at the ideal
pressure.
oPERAtING yoUR BREvILLE PRodUCt
AdvANCEd tEMPERAtURE
SEttING
The water temperature can be increased or
decreased by 1°C or 2°C if desired.
Coffee of different origins or roast profiles
may need a different espresso brew water
temperature to optimise their flavour. If your
espresso is tasting slightly “ashy” decrease
the brew water temperature by 1
°
C. If your
espresso is tasting slightly “sour” increase
your brew water temperature by 1
°
C.
HOT WATER
STEAM
POWER
CLEAN ME
PROGRAM
DEFAULT TEMPERATURE
-2˚C
+2˚C
SELECT
-1˚C
+1˚C
DESCRIPTION
INDICATOR
To amend temperature settings:
•
With the machine OFF, press and
hold the 1 cup button and then
simultaneously press and hold the power
button.
•
A beep will sound to indicate that
the temperature settings can now be
changed.
•
The LED of the last saved setting will be
illuminated. See table on left.
•
Pressing the 2 cup button to allows you
to toggle between the different settings.
•
Please note that if the 2 cup button is not
pressed within 10 seconds, the machine
will return to STANDBy mode and the
above steps will have to be repeated
•
After you have made a selection, 2 beeps
will sound to indicate that your setting
has been saved.
•
The machine will then return to
STANDBy mode.
RESEttING dEFAULt voLUMES
To reset the machine to the default 1 CUP
and 2 CUP shot volumes, press and hold the
PROGRAM button until the machine beeps
three times. Release the PROGRAM button.
The machine will return to its original
default setting.
NotE
Default settings: 1 CUP shot volume is
approx. 30ml. 2 CUP is approx. 60ml.
POWER
PRESS & HOLD
