13
Care & Cleaning
NOTE
Ensure that the beaters/dough hooks are not
soaked in water for an extended period of time,
i.e. for several hours overnight, as this may
damage the metal finish.
WARNING
Never immerse the hand mixer, power cord, or
plug in water or any other liquid.
STORAGE
Before storage, turn the power off at the power
outlet and remove the power plug from the
outlet. Ensure the hand mixer is cleaned and
completely dry.
STORAGE CASE
1. Put the storage case on a flat surface and
place the beaters and dough hooks inside
the storage case. Position the beaters so
they are in opposite directions from each
other. Do the same for the dough hooks
ensuring all attachments lay flat in the case.
CLEANING AFTER USE
1. Always ensure that the speed control
switch is in the OFF position, the power
is switched off at the power outlet, and the
power cord is removed from the power
outlet.
2. Press the EJECT button and remove the
beaters/dough hooks from the mixer.
3. Wipe the mixer body with a soft, damp
cloth then dry thoroughly.
4. Wipe any excess food particles from the
power cord.
5. Wash the beaters, dough hooks, storage
case in warm soapy water with a soft clean
cloth. Rinse and dry thoroughly.
6. Do not allow the beaters/dough hooks to
soak in water for an extended period of
time, as this may damage the metal finish.
NOTE
Do not place any part of the hand mixer inside
the dishwasher.
NOTE
Do not use abrasive scouring pads or cleaners
when cleaning the beaters/dough hooks as
these may scratch the surface.
NOTE
Do not wash or soak the mixer body in water or
any other liquid. Clean with a damp cloth and
dry thoroughly. Do not allow water or any other
liquid to enter the gear system as damage may
result.
