15
CARE, CLEANING & STORAGE
Before cleaning, switch the power off at the
power outlet and then remove the power
plug. Allow your sandwich press to cool
before cleaning. The appliance is easier to
clean when slightly warm.
Always clean your sandwich press after each
use to prevent a build up of baked-on foods.
Wipe cooking plates with a soft cloth. If
cooked on food is not removed by this
method reheat the unit for 1-2 minutes, then
brush with a little oil or melted butter. Allow
to stand for five minutes then wipe with a
damp cloth.
NOTE
The cooking plates are coated with a
non-stick surface, do not use abrasives.
NOTE
Do not use spray-on non-stick coatings
as this will affect the performance of the
non-stick surface on the cooking plates.
STORAGE
To store your sandwich press:
1.
Switch off at power outlet and unplug
power cord from the wall.
2.
Allow the sandwich press to fully cool.
3.
Slide the Adjustable Height Control
towards the front handle to the ‘LOCK’
position so that the top and bottom
cooking plates are locked together
(see Fig 4).
Fig. 4
4.
Wrap the power cord in the cord storage
area below the appliance (see Fig 5).
5.
Store on a flat, dry, level surface.
Fig.5
NOTE
The storage clip should not be used
to clamp down the top plate when
sandwiches are in the sandwich press.
WARNING
Do not immerse any part of the
sandwich press in water or any
other liquid.
Summary of Contents for BSG220
