8
Assembly
BEFORE FIRST USE
•
Before using your blender for the first
time, remove any packaging material and
promotional labels.
•
Be careful when handling the blades as they
are extremely sharp.
•
Wash the tumblers, lids, blade assembly and
attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts
(except sport cup and motor base) may be
washed in the dishwasher, on the top shelf.
ASSEMBLY
1. Remove blades and position the cup with
opening facing up.
2. Add ingredients, and avoid filling past the
MAX line.
3. Fix the blade assembly in place with
a quarter turn in the clockwise direction.
Ensure the blade assembly collar is securely
in place before inverting the cup to blend.
Functions
OPERATION
•
The blender will only work when the
blades and cup are correctly assembled.
This engages the safety interlock, and allows
the motor to run.
•
When the cup and blade assembly is
correctly assembled with ingredients inside,
invert cup, and place onto the motor base
using the alignment graphics. Always add
liquids when blending in the sport cup or
the tumbler.
•
To blend, securely hold the cup assembly
and twist clockwise on the base to the
ON position.
•
When the desired consistency is reached,
turn tumbler counter-clockwise to release and
disengage the motor.
•
Do not blend continuously for more than
60 seconds at a time. Allow the motor to rest
for 2 minutes before continuing.
•
Ingredients can be pulsed by rotating the cup
within the bayonet positions, which will turn
the motor on and off.
•
When finished blending, wait a few seconds
for the blades to stop spinning before lifting
the jar assembly off the motor base.
•
Invert the cup and allow the ingredients to
run off the blades for a few seconds before
unscrewing blades. Hold by the blade collar,
and turn counter-clockwise to remove.
•
For safety, turn the motor base off at the wall
and unplug when finished blending.
NOTE
Always add a liquid before you start to blend.
Summary of Contents for Boss To Go Sport BPB610
Page 23: ...23 ...
