background image

22

REPLACING THE WATER FILTER 
IN THE WATER TANK

REPLACEMENT DUE

4

Set date 3 months 

ahead

5m

H

2

0

1

Soak water filter

for 5 mins

2

Rinse water filter

3

Place filter into 

filter holder

5

Install filter in

water tank

6

Insert & lock

water tank

The provided water filter helps reduce the risk 

of scale build-up in and on many of the inner 

functioning components. Replacing the water 

filter every three months will reduce the need 

to descale the machine. If you live in a hard 

water area, it is recommended to change the 

water filter more frequently.

WARNING

After regular use, hard water can cause 

mineral build up in and on many of the inner 

functioning components, reducing the brewing 

flow, brewing temperature, power of the 

machine, and taste of the espresso.

• 

Remove the filter from the plastic bag, and 

soak in a cup of water for 5 minutes.

• 

Rinse the filter under cold running water for 

5 seconds.

• 

Insert the filter into the filter holder.

• 

Set the date dial 3 months ahead.

• 

To install, push down the filter to lock 

into place.

NOTE

For replacement of water filters contact 

Breville Customer Service Centre or visit 

our website at 

www.breville.com

CLEANING CYCLE

NOTE

This is a back-flushing cycle and separate 

from descaling.
The CLEAN / DESCALE light   will flash 

when a cleaning cycle is required.
1.  Insert the 1 CUP filter basket into the 

portafilter, followed by the supplied 

cleaning disc, followed by one 

cleaning tablet.

2.  Lock the portafilter into the group head 

and place a large container beneath the 

portafilter spouts.

3.  Ensure the water tank is filled with cold 

water and the drip tray is empty.

4.  Press the POWER button to switch the 

machine off.

5.  Press and hold

 1 CUP, 2 CUP & POWER 

buttons for 3 seconds.

+

+

3s

6.  The cleaning cycle will commence and last 

for approximately 5 minutes. During this 

time, water will intermittently flush into the 

portafilter to dissolve the cleaning tablet 

and flush back into the group head.

NOTE

No water should come through the portafilter.
7.  Remove the portafilter and ensure the tablet 

has completely dissolved. If the tablet has 

not dissolved; repeat from step 4 of the 

cleaning cycle until the tablet is dissolved.

8.  Once the tablet has completely dissolved, 

remove the cleaning disc, reinsert the 

portafilter and press the 2 CUP button to 

rinse the brew head. It is recommended to 

place a container under the portafilter spout 

to avoid water splashing onto the machine. 

Once complete, make sure to wipe off any 

splashes with a soft dry cloth.

Care & Cleaning

Summary of Contents for BES876































Reviews: