background image

4

OPERATING YOUR BREVILLE
ESPRESSO/CAPPUCCINO MAKER

BEFORE USING YOUR
ESPRESSO/CAPPUCCINO MAKER

Wash the filter holder, stainless filters, glass
carafe, twin nozzle adaptor and frothing jug
in mild detergent and water. Rinse
thoroughly.

It is recommended to carry out a complete
brewing operation with cold water but
without any coffee before making your first
espresso or cappuccino (see ‘Brewing
Coffee’). By doing so, any residual dust left
inside the Espresso/Cappuccino maker will
be removed.

Pre-warming cups

For optimal coffee temperature, use the cup
warming plate on top of the machine to pre-
warm the cups. When using the glass
carafe, place your cups onto the warming
plate, which will heat up as the coffee is
being brewed into the carafe.

HOW TO MAKE AN ESPRESSO

Filling the water tank

Turn off at the power outlet and unplug
the power cord.

Ensure the Brew/Steam selector control is
in the “OFF” position.

Unscrew the water tank cap and pour
cold water into the tank using the carafe
provided. Fill to 5mm below the visible
water pipes (fig 1). Do not fill to the top of
the tank or there will not be enough area
to generate steam.

Screw the water tank cap back on top of
the water tank, making sure it is secured
firmly before operating the machine.

DO NOT POUR WATER INTO
THE WATER TANK WHILE THE
SELECTOR CONTROL IS IN
THE BREW OR STEAM
POSITION.

3

KNOW YOUR BREVILLE 
ESPRESSO/CAPPUCCINO MAKER

1. 3.5 bar steam pressure system

2. Water tank hinged cover

3. Water tank cap 

4. Cup warming plate

5. 3 position Brew/Steam selector control

6. Power ‘on’ light

7. Filter holder and 2 stainless steel filters

(1-2 cup filter and 2-4 cup filter)

8. Twin cup nozzle adaptor

for brewing

directly into 2 cups

9. 4 cup glass carafe

for brewing up to 4

cups of coffee

10. Steam nozzle with removable

cappuccino froth enhancer

11. Stainless steel milk frothing jug

12. Removable drip tray

13. Bonus espresso cup set

(not shown)

14. Coffee measuring spoon

Never use warm or hot
water to fill the water tank.

NOTE!

Fig 1

1.

3.

11..

9.

7.

2.

4.

5.

6.

8.

10.

12.

14.

BR3578 ESP2 booklet AMENDS  13/1/04  5:46 PM  Page 3

Summary of Contents for Bar Italia ESP2









Reviews: