11
8. If the mixer has not been used for
5 minutes it will automatically change from
STANDBY mode to a power saving OFF
mode and the illuminated LED will switch
off. To exit OFF mode and begin mixing,
turn the dial to the selected speed or press
one of the count up/down timer buttons.
9. Do not turn the mixer on with the scraper
beater in place if the mixing bowl is empty.
This will cause the scraper beater to make
a loud noise as it scrapes the bowl.
10. When ingredients are in the mixing bowl,
the scraper beater may make a slight noise
as it scrapes the sides and bottom of the
bowl. This is normal and should not
cause concern.
11. Under heavier loads or extended mixing
time, the motor head may become warm.
This is normal and should not
cause concern.
Count-up timer
The count-up timer is for gauging mixing time,
making it easier to repeat the results.
Set the count-up timer using the arrow buttons
beside the LCD. The timer will automatically
begin counting up as soon as the dial is turned
to one of the speed settings.
When the dial is turned to PAUSE, the current
mixing time will flash on the display. When the
dial is turned to OFF, the LCD will reset back
to 0:00.
The maximum count up time is 60 minutes.
When the timer goes beyond 9:59, it counts
in whole minutes. Turn the speed control dial
back to OFF to reset.
Count-down timer
The count-down timer is for any recipe that
specifies the length of time ingredients should
be mixed.
To set the count-down timer, press the up or
down arrows until the desired mixing time is
displayed on the LCD screen. Press and hold to
scroll more quickly.
Rotate the dial to select the desired speed,
and begin mixing. When the timer has finished
counting down, it will beep. The motor will
automatically turn off and the timer will
flash OFF.
The control dial must be rotated back to the
OFF position to reset the timer and to continue
mixing.
Turn the speed control dial back to OFF
to reset.
Pause mode
At any stage during mixing (either count-up
or count-down mode), rotate the speed control
dial to PAUSE. This will turn the mixer off and
hold the current time on the LCD.
Add additional ingredients as needed, and
turn the dial back to a speed setting to
continue as before.
Turn the control dial to OFF to reset the timer.
