breviglieri hurricane h102, Operating And Maintenance Manual

Page: 20 / 96

- 20 -
Hypermaster XL
1.2.1 WARRANTY EXCLUSIONS
(Besides the circumstances indicated in the supply contract) the warranty becomes void:
When the damage can be ascribed to insufficient maintenance.
▪
When, following repairs made by the user without the Manufacturer’s consent or owing to the installation of spurious spare
▪
parts, the machine has been subjected to changes and the damage is ascribable to these changes.
When the machine has been hitched to tractors whose power rating exceeds the value given in the “Technical Specifica -
▪
tions” table in this manual.
When the user has failed to comply with the instructions in this manual. Damage deriving from negligence, carelessness,
▪
bad and improper use of the machine or incorrect manoeuvres by the operator are also excluded from the warranty. Remo -
val of the safety devices with which the machine is equipped shall automatically void the warranty and relieve the Manufac-
turer from all relative liability. The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be returned Carriage Free .
1.3 DESCRIPTION OF THE MACHINE
The Hypermaster XL cutter bears «CE» marking in compliance with the European Union standards described in directive 98/37/EC
and successive modifications, as stated in the declaration of conformity with which each machine is equipped.
Fig. 1
1
2
3
4
5
6
7
7
8
9
10
11
12
13
14
14
15
16
17
Frame 1.
Transmission unit 2.
Casing 3.
Cowling 4.
Three-point drawbar 5.
Driveline hook 6.
Bearing stand 7.
Parallelogram 8.
Frame guards 9.
Levelling roller 10.
Pivoting ram 11.
Shifting ram 12.
Top link pin 13.
Parallel hitch pin 14.
Transport pin 15.
Pivot linkage 16.
Swinging hitch 17.
Hammer 18.
Knife 19.
Identification plate 20.
20