background image

5 / 32

1 Validity information

This documentation is valid for the products with the article numbers listed below:

F004243 

Manual version:

 v0519

Manual description:

Manual_F004243_BR-D3000SL_en-nl-de_BRESSER_v052019a

With any service inquiries, please state these information.

2 About this Instruction Manual

NOTICE

These operating instructions are to be considered a component of the device.

Please read the safety instructions and the operating instructions carefully before use.

Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.

3 Intended use

• This device is not intended to be used by persons (including children) with limited physical, sens-

ory or mental capabilities or those who lack the relevant experience and/or knowledge, unless they
are supervised by a person responsible for their safety or have received instructions from this per-
son as to how the device is used.

• This device is for private use only.

• The device is for indoor use only.

4 General safety instructions

 DANGER

Risk of electric shock

This device has electronic parts operated via a power source (power supply and/or batteries). Im-
proper use of this product can cause an electric shock. An electric shock can cause serious or poten-
tially fatal injuries. The following safety information must be observed at all times.

• Disconnect the device from the power supply by pulling the power plug when it is not used or in

case of longer interruption of operation and before starting any work on maintenance and cleaning.

• Position your device so that it can be disconnected from the power supply at any time. The power

socket should be installed near the device and should be easily accessible as the mains cable
plug is used to disconnect the device from the power supply.

• To disconnect the device from the power supply, always pull on the plug. Never pull on the cable.

• Before starting up the device, check the device, the cables and the connections for signs of dam-

age.

• Never use a damaged device or a device with damaged live parts. Damaged parts must be imme-

diately replaced by an authorised service company.

• Discharge the device before maintenance work and cleaning.

• Only use the device in complete dry environment and do not touch it with wet or moist parts of

your body.

Summary of Contents for BR-D3000SL

































Reviews: