11 / 32
NOTICE! Only use the remote control recommended for this type of light! If a light is not to be
controlled synchronously, simply change the channel on the corresponding light.
*not included
13 Setting a channel for remote control
1. Press CHANNEL button to enable the channel setting. Two digits flash on the display (currently
set channel).
2. Rotate the adjustment knob to the right (+) to increase the value. Rotate the adjustment knob to
the left (-) to decrease the value.
3. Once the number on the display does not flash anymore the new channel value has been saved.
14 Technical data
Model
BR-D3000SL
Power consumption
300W
Number of LEDs
1
Luminous flux
27,000 LM
Lamps
LED, not replaceable
Color temperature
5,600K
Dimmer
digital, 10% to 100%
Power supply
DC 36V 8.9A power adapter or
optional via 2x Lithium battery*
Operating conditions
dry, 0° C to +40° C
Storage conditions
dry and dust-free, 0° C to +40° C
Table 1:
BR-D Series
NOTICE! The LEDs used in this device have a very long lifespan and do not need to be changed.
The LEDs can not be changed due to technical reasons!
*not included
15 Disposal
Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per Directive 2012/19/EC of the European Parliament on waste electrical and electronic
equipment and its adaptation into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
16 EC Declaration of Conformity
Bresser GmbH has issued a "Declaration of Conformity" in accordance with applicable
guidelines and corresponding standards. The full text of the EU declaration of conformity is
available at the following internet address: www.bresser.de/download/F004243/CE/
F004243_CE.pdf
