20
2. Via USB connection with a computer
In ON mode connect the camera with a computer using a
USB cable. The device will be shown as a flash drive and
you can easily start viewing images on the computer’s
screen.
3.6 Power off
Switch the On/Off lever to OFF position to power off the
camera. Please note that even in the OFF mode, the cam-
era still consumes certain power at μA level. Therefore,
please remove the battery if the camera will not be used
for a long time.
4. Troubleshooting
4.1 USB device is not recognized by the computer
This circumstance occasionally occurs in some OEM ver-
sions of Windows. It is not caused by a defect device. An
update of the USB drivers on the notebook or PC in most
cases solves the problem.
Technical specifications
Image sensor
2MP Color CMOS
Picture resolution
2 MP / 3 MP* / 5 MP*
(*interpolated)
Infrared light range
12 m
IR LED:
22 pcs. / 850 nm red Illumination
/ ca. 15m
Interfaces:
Mini USB Port,
microSD memory card slot
Memory card
microSD card up to 32 GB
Power supply
8x AA (minimum 4x AA)
LCD screen
3,5cm (1,4˝) Color LCD
Mounting
with belt
Dimensions
185 x 115 x 110 mm
Weight
330 g
