14 / 32
7. Web browser: Internet browser that support HTML 5
Router requirements:
Wi-Fi standard 802.11 b/g/n
Supported router security type WEP, WPA, WPA2, open (for routers without password)
19 Advanced settings
Upload
Browse
Firmware version: 1.00
-560~ 560hpa / -16.54 ~ 16.54inHg / -420 ~ 420mmH g
Setting Range:
Temperature
o
C
Outdoor
Indoor
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
Humidity %
Relative Pressure Offset:
Absolute Pressure Offset:
hpa
Range: -20 ~ 20
(Default: 0.0)
Current offset: 10
Current off set: -9
Current offset: - 5
Current off set: 2
Current offset: - 2
Current off set: 3
Current offset: - 2
Current off set: 1.2
Current offset: - 5
Current off set: -0. 2
Current offset: - 3
Current off set: -20. 1
Current offset: -10
Current off set: 11.5
Current offset: - 3
Current off set: -3
(Default: 0)
Current off set: 10
(Default: 0)
Current off set: 0.2
Current off set: -5
Current off set: 1
Pressure
Range: -20.0 ~ 20. 0
o
C
-36.0 ~ 36. 0
o
F (Default: 0.0)
*UV gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.1
*Light gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.1
* Depends on the model
*Wind speed gain:
*Wind direction:
*Rain gain:
Range: 0.5 ~ 1.5(Default: 1.00)
Range: -10 ~ 10(Default: 0
o
)
Range: 0.5 ~ 1.5(Default: 1.00)
Current gain: 0.8 5
Current off set: 2
o
Current gain: 0.7 5
SETUP
ADVANCED
SETTINGS
2
3
6
7
8
9
1
4
5
10
1 Select 'SETUP' to enter the settings menu
2 Select unit
3 Temperature calibration indoor/outdoor and
channel 1-7
4 Pressure calibration section
5 Latest firmware
6 Pressure calibration indoor/outdoor and chan-
nel 1-7
7 Select unit
8 Enter an offset value to compensate for the
measured pressure value
9 Gain value for rain, wind speed, UV and light
calibration. The wind direction has a +/- 10 off-
set.
10 The firmware update function only available in
PC/Mac web browser.
20 Automatic time setting
After the power supply and the Wi-Fi connection are established, the time and date information is
automatically transmitted by the Internet time server.
If the radio signal is received correctly, the date and time are set automatically and the reception sym-
bol is displayed.
If the time/date information was not received or not received correctly, proceed as follows:
1. In countries/regions whose time zone differs from the coordinated world time UTC, the time zone
must be set manually (see chapter 'Setting the time zone') in order to display the correct time.
2. Press the REFRESH button on the base unit for about 2 seconds to re-initiate the retrieval of Inter-
net time information.
3. Check the W-LAN settings on the base unit for correctness and correct them if necessary so that
an Internet connection can be established (see chapter 'Establishing a W-LAN connection').
Summary of Contents for 7002586
Page 3: ...English 4 Deutsch 18 ...