background image

GB

  INSTRUCTION MANUAL

MM-23

Fluorescence ring light with dimmer

Art. No.  F001428

GENERAL WARNINGS

DANGER OF BODILY INJURY!

Do not use in the presence of children or animals. Store out of reach 

of children and animals.
Allow the unit to cool down for some time before touching it. During 

operation, individual components may generate a lot of heat. 

Touching it can then lead to painful skin burns! 

RISK OF MATERIAL DAMAGE!

Make sure that no one can trip over connection cables of the device. 

The device could be knocked over.
Do not expose the device to moisture. Moisture penetrating the 

interior can cause irreparable damage to the electronics.
Do not subject the device to excessive vibrations. 
The manufacturer accepts no liability for damage to property caused 

by improper or insuffi  ciently safe installation!

 DANGER OF AN ELECTRIC SHOCK!

This device contains electronic parts that are powered by a power 

source (power adapter). Only use the device as described in the 

manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables, 

extensions or connectors. Protect cables from sharp edges and heat.

Check this device, cables and connections for damage before use.

Never attempt to operate a damaged device, or a device with damaged 

electrical parts! Damaged parts must be replaced immediately by an 

authorized service agent.
Operate the device only in a completely dry environment and do not 

touch the device with wet or damp body parts.

 RISK OF GLARE!

Make sure that people and animals do not look into the light. The 

high luminosity can cause glare to the eyes and afterimages. This 

impairment of vision can lead to accidents.

 FIRE/EXPLOSION HAZARD!

Always place the device in such a way that it cannot tip over and 

ensure that it is stored in a reasonably safe place.

•  Keep children and animals away from the device! They could knock 

the device over.

•  Make sure that no one can trip over connection cables. The device 

could be knocked over.

•  Do not expose the device to high temperatures. Do not short-

circuit the device or dispose of in fi re! Excessive heat and improper 

handling can cause short circuits, fi res and even explosions!

- Never cover ventilation slots - not even for a short time! Heat build-

up can cause fi res.

 IMPORTANT NOTE!

Do not disassemble the device! In the event of a defect, please contact 

your dealer. They will contact the Service Center and can arrange the 

return of this device for repair if necessary. 
Disconnect the power supply by pulling the mains plug when the 

appliance is not in use, in case of a longer interruption of operation 

and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power 

supply at any time. The power outlet should always be near your 

appliance and should be easily accessible, as the plug of the power 

cord serves as a disconnect device from the mains supply.

To disconnect the unit from the mains, always pull the mains plug 

and never pull the cable!

www.bresser.de/warranty_terms

WARRANTY

Summary of Contents for 4007922026596













Reviews: