15
*nicht im Lieferumfang enthalten
the complete number of images that
had been captured during the last
24 hours.
If video recording is set, you will get a
SMS message with information about
the complete number of videos that
had been captured during the last
24 hours.
3. “Instant”: This function is only available
in the ON mode. The camera sends
a MMS message each time when a
new image or video had been taken.
It´s possible to select the number of
images that should be sent each day.
If you select a maximum number of
“10”, the camera will send the first 10
images via MMS. All other images will
be stored on the SD-card.
4. “OFF”: Disable MMS function.
GPRS Set
Settings for sending e-Mails via GPRS
mobile network.
In order to send e-Mails, one has to have
the correct GPRS settings (for example
server port, APN, etc.,). If you are not
familiar with these settings, please
contact your mobile and e-Mail provider
for further information and assistance.
MMS Set
The camera sends MMS messages via
the GPRS mobile network. However,
your mobile phone provider must activate
the GPRS service. The camera supports
the following 4 transmission frequencies
(Quad-Band): 850 MHz, 900 MHz,
1800 MHz and 1900 MHz. In order to
send MMS messages the camera must
have the correct settings activated (for
example URL, APN, IP and Port). Please
contact your mobile phone provider
should you have difficulties activating
these settings.
Timer Switch
The camera can be activated for a certain
period of a day. The camera is switched
off the rest of the time.
Sense Level
Choose sensitivity of PIR (Passive
infrared motion sensor).
The higher the setting, the easier the
motion sensor activates triggering. It is
recommended to use Normal mode. The
sensitivity of the PIR is strongly related to
temperature. High temperatures reduce
sensitivity. Therefore, you may need to
adjust the sensor level to an appropriate
value.
GB
