brent THE GRAIN TRAIN 740, Operator'S Manual/Parts Catalog

Page: 36 / 43

- MODEL 740 -
Page 36
14. Assemble tarp (37) and stops with
caps, (28,29) to top of left hand side
boards with capscrews and nuts (40).
Note: With tension on tarp, install
center stop first. Align tarp and in-
stall two outer stops.
The tighter
the tarp, the better the wear. See
Fig. 10.
Fig. 10
15. Insert U-joint (10) over splined cou-
pling (part of 33) and secure with
wire pin (11). Place handle exten-
sion (14) into U-joint and secure with
spring pin (12). Insert handle (13)
into extension (14) and secure with
capscrew (2) and locknut (7). See
Fig. 11.
Fig. 11 270917-11
13. Lift tarp (37) with tubes (33,34) onto
top of left side boards. See Fig. 9.
Anchor stretch rope (23) to rod eye
(3) in end of latch plate.
270917-8
Fig. 8
270917-10
11. Assemble pvc pipes (18,19) and con-
nectors (20) as required with plastic
adhesive (22). See Fig. 8.
12. Insert knotted stretch rope (23)
through flatwasher (4) and plastic tube
(18-20). Place these items as an
assembly into front of large rolling
tube (33) and tap retainer (21) into
rolling tube. See Fig. 8.
Fig. 9
270917-9
• 11-19-97
SERVICE