Brent 1082/882
— Operation
3-4
Preparing Cart
(continued)
Soft Start System
Check for wear or damage. Lubricate as recommended. Do not over lubricate.
Hydraulic System
Check all hoses and cylinders for signs of leakage. Hoses should not be kinked, twisted or
rubbing against sharp edges. Re-route or repair hoses as necessary. Refer to SAFETY section
for additional information on safe repair and inspection of hydraulic components.
Tires/Wheels
Check tire pressures and maintain at recommended values listed in the MAINTENANCE sec-
tion of this manual.
• IMPROPERLY TORQUED WHEEL NUTS/BOLTS CAN CAUSE A LOSS OF IMPLEMENT
CONTROL AND MACHINE DAMAGE. WHEEL NUTS/BOLTS MUST BE CHECKED REGU-
LARLY. SEE TORQUE PAGE IN THE “MAINTENANCE” SECTION FOR PROPER WHEEL
NUT/BOLT SPECIFICATIONS. WARRANTY DOES NOT COVER FAILURES CAUSED BY
IMPROPERLY TORQUED WHEEL NUTS/BOLTS.
• Installing wheels without the proper inset could result in hub or spindle failure. This will cause
substantial damage to cart.
For questions regarding new tire warranty, please contact your local original equipment tire
dealer. Used tires carry no warranty. Tire manufacturers’ phone numbers and web sites are
listed in the “MAINTENANCE” section of this manual for your convenience.
Lubrication
Lubricate the cart as outlined in the MAINTENANCE section of this manual.
(April 2015)
