EN
11
Wireless flush-mount shutter actuator 868.3 MHz
Wireless flush-mount shutter actuator 868.3 MHz
The range in buildings may vary greatly from open areas. In addition to
the transmission power and the reception characteristics of the receivers,
ambient conditions, e.g. humidity in addition to the structural conditions
on site, are important factors.
The range can be significantly reduced in part due to:
• wood, gypsum, concrete, reinforced concrete walls
• proximity to metal and conductive objects
• broadband interference, e.g. in residential areas (DECT phones,
mobiles, wireless headphones, wireless speakers, wireless
weather stations, baby monitors)
• proximity to electric motors, transformers, mains adapters,
computers
Duty Cycle
Duty cycle refers to a transmission time limit regulated by law for
devices transmitting in the 868 MHz range. It is intended to ensure
smooth operation of devices operating in the 868 MHz range. The
maximum transmission time of each device is 1 % of an hour
(corresponding to 36 seconds / hour). Once the 1 % limit has been
reached it cannot transmit until the time limit of the duty cycle has
ended, so after one hour.
Included in delivery
1 x Wireless flush-mount shutter actuator
1 x Quick start guide
1 x Instructions for use (digital, available for download)
Technical data
Product designation:
UPRS 868 01 W300 3726
Item no.:
1294350
Radio frequency:
868.3 MHz
Frequency:
868.1 - 868.5 MHz
Max. transmitting power: < 20 mW
Duty cycle:
< 1 % per h
Supply voltage:
230 V/AC, 50 Hz
Switching capacity:
max. 300 W
Power input:
< 1 W
Ambient temperature:
0 °C to 35 °C
Protection type:
IP00
Open area range:
approx. 100 m
Dimensions (W x H x D): 52.5 x 52.5 x 25.5 mm
Weight:
42 g
Subject to technical changes without notice.
Device overview
Front
Pair button
B
Shutters connection “down“
L
External conductor connection
L230 V phase
A
Shutters connection “up“
N
Neutral conductor connection
N 230 V
C
Connection phase L 230 V
Function
The wireless flush-mount shutter actuator is part of the Brennenstuhl Home
Automation Systems BrematicPRO, controlled via app or the BrematicPRO
PC software. The wireless flush-mount shutter actuator can be connected
and controlled directly with the BrematicPRO wireless remote control to
open or close shutters. It can be directly linked with the Brennenstuhl
Home Automation Systems BrematicPRO via the BrematicPRO Gateway
to use other software-based functions (e.g. timer control, theme
control, astro function).
Device LED
LED status
flashes red
Pairing mode
rapidly flashes red
Wireless shutter actuator is reset
lights up green
UP
lights up red
DOWN
Back
Summary of Contents for 1294350
Page 34: ...34...
