brennenstuhl 1294350, Instructions For Use Manual

Page: 14 / 35

14 EN
Wireless flush-mount shutter actuator 868.3 MHz
Cleaning the device
CAUTION! RISK OF ELECTRIC SHOCK!
Before cleaning the device, disconnect the power supply (if necessary,
via circuit breakers).
Do not allow any liquid to enter the device. Liquids which get into the
product can cause it to short circuit.
Clean the device with a dry, lint-free cloth. For tough dirt, you
may also slightly dampen the cloth.
Do not clean with solvent-based cleaners. These could damage
the product surface and markings.
Never immerse the device in water or other liquids. The device
may otherwise be damaged.
Ensure the device is completely dry before using it again.
Action
Problem Possible cause Action
LED doesn't flash. Device has not been
installed correctly.
The circuit breaker is
not switched on. Have installation
carried out correctly.
Switch on the circuit
breaker.
Device not detected. The device is out-
side the Gateway
range.
Reduce the distance
to the Gateway.
Disposal
The packaging is made from environmentally-friendly
materials which can be disposed of through your local
recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life, not in the household waste. Please contact
your municipality for information on collection facilities
and their opening hours.
Service
For questions related to the product, please contact us at
www.brematic.com/gb/service.
Tel.: 0080048720743 (toll-free)
Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 ∙ D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 ∙ CH-6340 Baar
www.brematic.com
www.brennenstuhl.com
Declaration of conformity
Hugo Brennenstuhl GmbH & Co.KG, hereby declares the wireless
system model UPRS 868 01 W400 3726 to comply with directives
2014/53/EU and 2011/65/EU (RoHS II). The full text of the EU
declaration of conformity is available at the following internet
address: www.brematic.com/gb/service/konformitaetserklaerung/
ke_1294350.pdf
This product complies with the legal, national and European requirements.
All company names and product names are trademarks of the respective
owners.
All rights reserved.
Table des matières