Breitling COCKPIT B50, User Manual

Page: 20 / 175

19
3. INITIALIZING THE WATCH
When used for the first time, or after having been charged, the watch guides the
user though the following sequence:
1. Pull the crown into position 2 (
PULL CROWN
) in order to activate the settings
function.
2. Synchronize (
SyNCHRO
) the hour, minute and seconds hands with the digital
display (see chapter 7.a).
3. Set the exact time on the UTC timezone (
SET UTC
), which constitutes the watch’s
main time base – and not the local time (see chapter 4)
4. Set the date (
SETDATE
) (see chapter 5)
5. Set the main TIME zone (
SETTIME
) with regard to the difference with the UTC
time (see chapter 6).
6. Press the crown back to neutral position 1.
Depending on the state of the watch prior to being charged, only some, if any,
settings will be required.
N.B.: It is only possible to adjust the minutes in one-minute increments in
UTC
mode.
In
TIME
or
TIME 2
mode, the hours are adjusted depending on the difference with
UTC time and the minutes in 15-minute increments. The seconds on the other hand,
can be adjusted precisely in each of the timezones and will automatically be updated
in the other zones.