Breitling COCKPIT B50, User Manual

Page: 24 / 175

23
If the date was displayed,
SETDATE
appears on the upper screen and the setting
process will start with adjusting the date. In the second case, press on P2 until
the hours begin to flash (
UTC +/-
xx).
• By turning the crown, adjust the time in relation to difference with UTC, from
UTC-12
to
UTC+14
.
• Confirm by pressing P2; the minutes flash (display
MIN +00
) on the upper screen.
• If necessary, adjust the minutes in 15-minute increments and confirm by pressing
P2; the seconds flash (
SECOND
appears on the upper screen).
• Adjust the seconds (which will automatically be adjusted in the
TIME 2
and
UTC
)
and confirm by pressing P2.
• Press the crown back to neutral position 1.
N.B.: When in setting mode (
SETTIME
), pressing P1 will restart the seconds counter
from 0. The seconds counter only stops when the seconds are manually modified. In
this case, it restarts when exiting setting (putting the crown back to neutral position
1). The seconds are automatically synchronized on the
UTC
and
TIME 2
timezones.
In
TIME
mode, pressing P1 makes it possible to go into
DATE
mode and display the
date according to different formats (see chapter 8). A long press on P1 puts the
display directly back to
TIME
.
In
TIME
mode, a long press on P2 allows to choose between either the 12-hour (AM
or PM indicator) or the 24-hour display. The change also happens automatically for
the TIME 2 zone and two alarms.