Breitling BENTLEY SUPERSPORTS B55, Manual

Page: 25 / 166

45 44
• Pull the crown into position 2 (the upper screen will display
SET RLy
), and then
by turning the crown (press P1 to activate the desired setting):
– The
PARK
function (
PARK ON
or
PARKOFF
) which allows the minute and hour
hands to be parked automatically during the timing.
– Synchronization of the seconds hand (
SyNCHRO
), if the seconds hand does not
position itself precisely on 0. Turn the crown to reposition the hand on 0 and
confirm by pressing P1.
• Confirm the settings by pressing P1 and/or by pressing the crown back into neu-
tral position 1.
b) Timing a rally
• Select the
RALLy
function by turning the crown. The seconds hand moves to
noon and becomes the chronograph hand. The upper screen displays
RALLy
x,
where x corresponds to the ongoing rally.
• A long press on P1 activates a new rally.
• Pressing P1 starts the chronograph. The upper screen displays
STAGE
xx (xx being
the number of the stage), the lower screen the hours, minutes and seconds up
to 99 hours, 59 minutes and 59 seconds.
• A second press on P1 stops the chronograph (upper screen:
STOP
xx alternately
with the 1/100 of a second).
b) Synchronizing the seconds hand
If the seconds hand does not position itself exactly on 0 in
LAP TMR
, proceed as
follows:
• Pull the crown into position 2; synchronization of the hand (
SyNCHRO
) is activated.
• Turn the crown to reposition the hand on 0.
• Press the crown back to neutral position 1.
c) Recovering times
If the watch is connected to a smartphone, using the application on the latter,
times of laps recorded can be recovered.
12. “RALLY CROSS“ CHRONOGRAPH (
RALLy
)
The rally chronograph enables timing of different races in a rally (up to 30 stages
or
STAGE
), with the option of intermediate times for each one (a maximum of 4
SPLIT
) and calculating the total time (total of all stages). Penalty times can also be
added for each stage or for the rally. A maximum of 5 rallies may be recorded on
the watch (see example at beginning of user’s guide).
a) Settings (
SET RLy
)
• Select the
RALLy
function by turning the crown.