12
Chapter 1: Hardware insertion.
Chapter 1:
Hardware insertion.
REQUIRED TOOLS
REQUIRED HARDWARE
• Rubber Mallet
• Cordless Drill with #2 Phillips
• 1/2” Socket
• Allen Wrench (Hardware Card #2)
• Hardware Package #1 (white box)
• Hardware Card #2 (mech. box)
• Hardware Package #6 (white box)
• Hardware Package #20 (white box)
Right Hutch
Left Side
FIG. 1A
MAKE ABSOLUTE CERTAIN THE PACKAGE
USED ON THIS STEP IS LABELED #20 AND
NOT #1. USING PACKAGE #1 ON THIS STEP
COULD LEAD TO STRUCTURAL FAILURE.
USE
THESE
NOT
THIS
Referring to Fig. 1A, insert male/female
screws from Hardware Card #20 in holes
marked with a
blue
circle (male end
inserts from one side of the panel and the
female inserts from opposite side, then
they tighten together).
STEP 1
For video instructions of this step, visit:
breda.us/pkg20
