16
Chapter 1: Hardware insertion and Bed Cabinet assembly.
STOP
Using a #1 Phillips screwdriver, verify all cams are locked to the
connecting cam screw.
Are all cam fittings locked?
•
Cam fittings on the Top Nailer, Bottom Nailer, Toe Kick and
Headboard should face the wall and NOT be visible from the front.
•
Cam fittings on the Bed Cabinet Top should face down and
WILL be
visible from below.
If any of these parts are backwards, they must be flipped around. The
most critical of these pieces is the Top Nailer, which should have the
white “WARNING” sticker visible from the front at this point. The yellow
“SAFETY ALERT” sticker should be facing the wall and not be visible.
Are all cam fittings facing down
(on vertical parts) or facing the
wall (on horizontal parts)?
If you have any question, contact us (phone:
1-855-466-4781
, email:
or live chat:
https://bredabeds.com
) before proceeding.
*** STOP - SAFETY CHECKLIST ***
The items listed on this page are some of the most common errors during assembly
and can lead to structural failure of the Murphy Bed if not done properly.
DO NOT PROCEED PAST THIS PAGE WITHOUT FIRST VERIFYING THE FOLLOWING:
