26
Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet.
Chapter 5:
Attaching the Bed Face
Panel to the Bed Cabinet.
REQUIRED TOOLS
• 1/2” Socket
• 1/2” Wrench
Slide the steel
tube over the
mechanism arm
and pull outward
to engage the
arm lock on
the T-Nut as
shown in Fig. 5A.
Repeat steps for
opposite side.
FIG. 5A - LEFT SIDE SHOWN
STEP 1
The mechanism arm will have a considerable amount of tension, this is normal
and why we include the steel pipe. You should place your foot against the
bottom on the bed to prevent the Bed Cabinet from pulling away from the
wall and doing this will also help get leverage to pull the arm down. It may
also appear to be slightly bent, which is normal.
REQUIRED HARDWARE
• Hardware Card #2
For video instructions of this specific chapter, visit:
breda.us/face
