12
Chapter 1: Hardware insertion.
Referring to Fig. 1B, lay parts on floor and insert cam screws
from Hardware Package #1 in holes marked with a
red
circle
using a cordless drill (see note at the bottom of this page).
Insert cam fittings from Hardware Package #6 in holes
marked with a
green
circle using a rubber mallet (see note at
the bottom of this page). Cam fittings should be inserted with
the flat part of the cam fitting flush with the side of the panel.
Headboard
Bed Cabinet Top Nailer
Bed Cabinet Top
Bed Cabinet Toe Kick
Bed Cabinet Bottom Nailer
FIG. 1B
STEP 2
When inserting cam fittings, place the panel on a flat, solid surface so that
the force of the mallet is distributed evenly to the underlying surface.
The quantity of holes for Top and Top Nailer will vary depending on bed size.
Insert cam screws/fittings in each hole along the top of these panels.
