Brecknell SBI-240, Service Manual

Page: 33 / 78

SB
I-240
Service Manual 31
4 Setup Mode
The setup menu consists of five different sub-menus. Within each sub-menu are
different menu options.
The config/cal switch must be set in the ON position in order to make changes to
specific parameters.
4.1 Entering the Setup Menu
1. Power on the indicator by pressing and holding the ZERO/ON/OFF/ key.
2. Press the SETUP key for 3 seconds. The indicator shows
config
to indicate
the Setup Menu mode has been entered.
3. In the Setup mode, use the arrow keys to select a menu item. Press the TARE/
PRESET key to enter the parameter.
4. Press the key to select the sub-menu item, to select a choice, to
set a number, to confirm and save data, and/or to exit this mode.
4.2 Navigating the Setup Menu
1. Once
Config
is displayed, use the [UNIT] key to move to forward through
the menu choices or the [HOLD] key to move backward in the setup menu.
2. Use the [TARE] key to access the desired menu. (e.g.
User
)
3. Use the [UNIT] key to view the available sub-menus (parameter: e.g.
beep
).
4. Use the [TARE] key to select the sub-menu.
5. Use the [UNIT] key to view the choices within the sub-menu. (e.g.
key
)
6. Press the [TARE] key to select the desired choice within the sub-menu. Once
selected the parameter will be displayed.
7. Press [ZERO] to return back up and return to the setup menu.
CONFIG USER CAL MISC TEST