Brecknell DS 1000-LCD, Operator'S Manual

Page: 14 / 31

AWT35-100107 Rev AB 14/30
3. Use the
↑ ↓
keys to adjust the number of items to be sampled.
4. Press the
TARE
key to confirm.
5. The indicator calculates the piece weight and returns to counting mode screen.
If the piece weight obtained is less than 0.5 div, the indicator displays PWT.ER.
4.5 Percent Weighing Mode
As the counting mode, the DS1000 Percent weighing mode has been designed to allow the operator to
easily carry out weighments on % basis. The PERCNT mode can be disabled and the % format changed
in the Config Menu .
5. Power up the scale and zero the display, if necessary, by pressing the
ZERO/ON/OFF
key. Be
sure the scale is displaying weight in your preferred unit of measure. Press the
UNIT
key, if
necessary.
6. Press and hold the
FUNC
key for three seconds. Press the
↑ ↓
keys to navigate menu options.
7. Select the PERCNT option and press the
TARE
key to confirm.
The
%
annunciator flashes and the last stored % item weight is recalled.
8. Place the item(s) to be weighed on the scale platform.
9. The weight as percentage value of the % item weight is displayed.
10. Remove the item(s) from the platform and repeat the steps above for other
% weighments.
In % weighing mode, the function of Hold, Print, Acc, Data, Tare and, Zero keys are available.
4.5.1 Calculating % Item Weight
3. In percent mode, press the
DATA
key. Release the key when the “SPL.---” message pops up.
4. Place a known weight item(s) to be weighed as % weight on the scale platform. Press the
TARE
key to confirm.
The “INP.PCS” message pops up.
5. Use the
↑ ↓
keys to adjust the % value.
6. Press the
TARE
key to confirm.
7. The indicator calculates the 100% item weight and returns to percent mode screen.
If the piece weight obtained is less than 0.5 div, the indicator displays PWT.ER.