Breas Medical Vivo 45, User Manual

Page: 95 / 226

95 How to Use the Vivo 45
Vivo 45 User Manual
Doc.006149 En Y-2
Using the Vivo 45 with Effort Belts
Up to two effort belts may be connected to the Vivo 45 by the accessory
Effort belt communication box.
When the effort belt communication box is connected, the Vivo 45 will:
• Perform a start up test when an effort belt is connected.
• Check the effort belt unit for internal failures.
• Include real time wave forms from the effort belts on the Effort
monitoring page.
• Store the effort belt measurements in the internal memory. The
effort belt measurements will also be included in the data that can
be downloaded and analysed with Breas PC software.
• Automatically detect the belt, also after powering off/on or after
power failure
Connecting the Effort Belt
The effort belt communication box and the Remote Start/Stop use the
same port on the Vivo 45. Only one of the accessories can be connected
at a time.
1
Connect the black pins of the wire set to the effort belt.
2
Connect the key-shaped connector of the wire set to the communica-
tion box.
3
Connect the Effort belt com-
munication box to the Vivo 45.