BRAYER BR4705, Instruction Manual

Page: 5 / 33

8 9 en en
• Notes:
- use the water tank (3) handle (2) only for carrying
the water tank (3);
- do not use the handle (2) to carry the air humidifier
with the water tank (3) installed.
• Turn over the water tank (3), unscrew the lid (7) with
the cartridge filter (6) turning it counterclockwise.
• Fill the water tank (3) with necessary amount of
water, insert the lid (7) with the cartridge filter (6) into
the water inlet (5) and thread it rotating clockwise.
• Notes:
- to avoid appearance of white deposits on interior
objects it is recommended to use boiled and
settled water, filtered or distilled water;
- before the first use it is recommended to unscrew
the cartridge filter (6) from the lid (7) and put it into
a suitable container with water for 5-10 minutes.
- install the cartridge filter (6) on the lid (7) and
thread it rotating clockwise.
- the cartridge filter softens hard water, removes
unpleasant smells and prevents generation of
bacteria.
• First place the filled water tank (3) back to its place
and then install the nozzle (1).
• Wait till the process chamber (8) is filled with water.
• Insert the power cord plug (5) into the mains socket,
you will hear a sound signal.
On/OFF BUTTOn «On/OFF »
• Press or touch the button (10) «ON/OFF » (on the
remote control). The air humidifier will switch on in the
automatic room humidifying mode, the symbol «AUTO»
will light up on the display (7). In the «AUTO» mode the
unit estimates the optimal room humidity every minute
and maintains it.
• To finish the unit operation press/touch the button (10)
«On/OFF » again.
PLASMA MODe «PLASMA »
• To switch the plasma mode on touch the button (11)
«PLASMA » on the control panel (6) or press the
button (11) « » in the remote control, the symbol (18)
« » will light up on the display (7). To switch off the
plasma mode press or touch the button (11) again, the
symbol « » will go out.
• In the plasma mode the generator produces both
positive and negative ions, the amount of negative ions
is 1,5 times more than the amount of positive ions.
negative ions clean the air in the room and positive
ions kill various bacteria.
WATeR HeATInG MODe «HeATInG »
• To switch the water heating mode on/off touch/press
the button (12) «HEATING », the symbol (20) «
» will light up on the display (7). To switch the
water heating mode off touch/press the button (12)
«HEATING » again, the symbol « » will go out.
• Note: - be careful when using the air humidifier in the
water heating mode, the outgoing mist is hot.
SeTTInG THe ROOM ReLATIve HUMIDITY
Relative humidity is the ratio of the mass content of
water vapor in the air to the maximum possible mass at
the given temperature; relative humidity is measured in
percent and is indicated, for example, as «45%».
Atmosphere air always contains water vapour,
percentage of which depends on meteorological
conditions; the higher the temperature, the more water
vapour is contained in the air. When cold air is heated
up to comfort temperature in winter, relative percentage
of water vapour decreases, this is what relative humidity
is.
To maintain comfortable room conditions, water or water
vapor must be artificially added to the ambient air — this
is what the air humidifier is necessary for.
Comfortable relative humidity for humans is «45-65%»;
«40-55%» for preventive and medicinal purposes;
for furniture, musical instruments and libraries it is
recommended to maintain relative air humidity of «40-
60%».
• Consequently pressing/touching the button (16)
«HUMIDITY » you can set the desired humidity
level within the range from 30% to 75% with a step
5%. After setting the relative humidity it will be
shown every 5 seconds on the display (7) with digital
symbols (22) «%RH». Touch/press the button (16) to
view the preset humidity.
• When the desired humidity level is reached, the air
humidifier will be switched off, when the relative
humidity level decreases, the air humidifier will switch
on.
• To switch the selected humidity maintenance mode
off press/touch the button (16) «HUMIDITY » until
the flashing symbols (23) «Co» appear on the display
(7).
• Note: — touch the symbol « » for a
long time to switch the humidity maintaining mode off
and switch to the automatic humidifying mode, the
symbol «AUTO» will light up on the display (7).
MIST ReLeASe InTenSITY COnTROL
• Consequently pressing the symbol (15) «
» on the control panel (6) or
pressing the button (15) « » on the remote control
you can select 7 mist release intensity modes. The
modes will be shown with symbols (23) «MIST
VOLUME» on the display (7). 5 seconds after setting
the mist release intensity the current humidity level
and temperature will appear on the display (7).
• Note: — despite the operating mode, if the room
humidity increases to 90%, the air humidifier will
switch off. If the room humidity level goes below
85%, the air humidifier will switch on again.
ILLUMInATIOn SWITCHInG On/OFF «LIGHT »
• you can switch the night mode on/off only with the
button (13) on the control panel (6).