BRAYER BR2005, Instruction Manual, Page: 8 / 36

8 EN
• To switch the grill off turn the thermostat control knob
(8) and set it to the position «1». Then unplug the
unit.
USING THE GRILL AS A COOKING UNIT
• You can use the grill as a flat frying surface.
• Before connecting the power plug to the mains
socket open the grill. To do this, take the handle (6)
and lift the upper part of the grill.
• Set the lock (7) to the «180°» position and open the
grill completely.
• Connect the power plug to a mains socket, the
power-on indicator »power” (9) will light up.
• Turn the thermostat control knob (8) and set the
required operation mode «1-2-3-4-5»
• Wait until the frying plates (3, 4) heat up, the indicator
(10) will light up.
• Carefully put the products on the frying plates (3,
4), avoid burns by possible splashes of juice or fat
dripping from the products.
• Put the prepared products into an appropriate dish;
use wooden or heat-resistant plastic kitchen tools to
remove the products.
• To switch the grill off turn the thermostat control knob
(8) knob to the position «1», the light indicators (10,
11) will go out. Then unplug the unit.
• Wait until the grill cools down completely and fold the
upper and the lower (2) parts together.
• To fix the lower (2) and the upper parts of the grill set
the lock (7) handle to the position « ».
CLEANING AND CARE
• Clean the frying plates (3, 4) of the grill after every
use.
• To switch the grill off turn the thermostat control knob
(8) knob to the position «1», unplug it and wait until
the press grill cools down completely.
• Clean the grill body surface with a slightly damp cloth
and then wipe it dry.
• Take the handle (6) and open the grill.
• Wipe the frying plates (3, 4) with a damp cloth,
then dry up. To clean the frying plates (3, 4) use a
minimum amount of a neutral detergent, then wipe
the frying plates (3, 4) with a damp cloth and dry up.
• Make sure that no detergent gets into the grill body.
• Remove the tray (1) and pour the liquid out of it.
• Wash the tray (1) with warm water using a neutral
detergent, rinse, then dry up.
• Do not use metal brushes, abrasives or solvents to
clean the frying plates (3, 4) and the grill body.
• Do not immerse the grill, the power cord and the
power plug into water or any other liquids.
STORAGE
• Before taking the grill away for storage clean the
frying plates (3, 4), the tray (1) and the grill body.
• Press together the lower (2) and the upper (5) parts
of the grill and set the lock (7) handle to the position
« ».