22
Motor
1. Release the black connector of the motor cord.
2. Cut off the band.
3. Release three screws on the motor cord cover.
4. Release two nuts for the motor shaft.
5. Release the rear caliper to remove the motor.
6. Follow with the reversed steps to restore.
Tools Required: Phillips screwdriver; Open-end wrench, 24mm; Y-bend socket wrench,
12mm; Diagonal cutting pliers
Time: Allow 10 minutes for procedure
Summary of Contents for EVT- 4000e
Page 1: ...SERVICE MANUAL SERVICE MANUAL EVT 4000e EVT 4000e ...
Page 45: ...43 ...
