18
Rear Brake Hose
1. Release three screws on the handle cover.
2. Release two screws on the left reservoir.
3. Release the screw on the brake hose of the rear wheel Avoid fuel leaking to the pad.
4. Release the screw on the left side brake hose.
5. Release three screws on the front cover.
6. Release six screws on the front fender.
7. Release two screws on the left trim.
8. Cut off the band, and carefully pull out the hose.
9. Follow with the reversed steps to restore.
Tools Required: Phillips screwdriver; Box wrench, 12mm; Diagonal cutting pliers
Time: Allow 10 minutes for procedure
Summary of Contents for EVT- 4000e
Page 1: ...SERVICE MANUAL SERVICE MANUAL EVT 4000e EVT 4000e ...
Page 45: ...43 ...
