15
Front Fork
1. Release three screws on the front cover.
2. Release six screws on the front fender.
3. Release three screws on the glove box.
4. Release clamping screw for the handle.
5. Release front axle nut to remove the wheel.
6. Release two screws on the caliper.
7. Release two screws on the front fork and check the steel balls to see if they are missing.
8. Properly adjust the front fork clearance and follow the reversed steps to restore.
Tools Required: Phillips screwdriver; T-bend socket wrench, 8mm; Box wrenches, 14mm and
17mm; Y-bend socket wrench, 12mm
Time: Allow 10 minutes for procedure
Summary of Contents for EVT- 4000e
Page 1: ...SERVICE MANUAL SERVICE MANUAL EVT 4000e EVT 4000e ...
Page 45: ...43 ...
