Brave VH0622 Owner/Operator And Safety Manual Download | Manualshive

Page: 5 / 48

background image

Safety Alert Symbol

The safety alert symbol

is used to identify safety information about hazards that can

result in personal injury.

A signal word (WARNING or CAUTION) is used with the alert symbol to indicate the like-
lihood and the potential severity of injury. In addition, a hazard symbol may be used to
represent the type of hazard.

WARNING

indicates a hazard which, if not avoided,

could result in death or

serious injury.

CAUTION

indicates a hazard which, if not avoided,

might result in minor or

moderate injury.

IMPORTANT NOTICE

indicates a situation that

could result in damage to the log

splitter, cylinder, or engine.

The following is a list of safety rules you must follow in order to use your log split-
ter safely.

General

To avoid personal injury or death, carefully read and understand all instructions
pertaining to the Brave Products’ log splitter.

Do not attempt to operate or maintain our product without fully understanding all
our instructions and safety precautions. Do not operate the log splitter unless
you read and understand the instructions and warnings in this manual. If any
doubt or question arises about the correct or safe method of performing any-
thing found in this or other Brave Products’ manuals, contact your Brave Prod-
ucts’ dealer or call the Sales and Service representatives at our main head-
quarters. Proper care is your responsibility.

Accidents can often be avoided by being alert and recognizing potentially haz-

ardous situations. Any individuals operating, maintaining, or repairing products
manufactured by Brave Products should have the necessary training, skills, and
tools required to perform these functions properly and safely. The safety infor-
mation in this manual serves as a basic guide in an attempt to prevent injury or
death.

Brave Products cannot anticipate every possible circumstance that might
involve a potential hazard. The warnings in this manual and on the product
itself are, therefore, not all inclusive. If tools, procedures, work methods, or
operating techniques that are not specifically mentioned by Brave Products are
used, you must satisfy yourself that they are safe for you and for others. Make
sure the log splitter will not be damaged or made unsafe by any operation, lubri-
cation, maintenance, or repair procedures that you choose.

800-350-8739

3

Brave Products, Inc.

Safety

«
...
3
4
5
6
7
...
»

Summary of Contents for VH0622

















































Reviews:

No comments

Related manuals for VH0622

Brand: Yard-Man Pages: 16

Brand: Clarke Pages: 8

Brand: M&M Pages: 19

Brand: AVANT Pages: 41

Brand: YTL Pages: 24

Brand: Park Pages: 64

Brand: Yukon Pages: 20

Brand: Scheppach Pages: 108

Brand: Powerhouse Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands