Brave VH0622 Owner/Operator And Safety Manual Download

Page: 44 / 48

These attachments are designed to fit both Brave 22 and 26 ton log splitters.

Log Cradle (Part No. BR021181)

✔

Holds log in place on top of rail for faster splitting.

✔

Catches split logs - no more stooping to pick up the split pieces.

✔

Each shelf is infinitely adjustable up to 45 degrees to accommodate various sizes of logs.

✔

Mounts easily to H-beam rail - all hardware included, requires no drilling or welding on
current model log splitters.

Log Dislodger (Part No. BR021172)

✔

Helps eject any log that sticks to the splitting wedge.

✔

Protects control valve and other hydraulic components from damage.

✔

Rugged construction to last the life of your log splitter.

✔

Mounts easily to splitter rail - all hardware included, no drilling or welding required.

Safety Flag Kit (BR012104)

✔

Improves visibility of logsplitter when backing up or towing.

✔

Heavy-duty tapered fiberglass pole won't bend over at towing
speeds.

✔

Installs in minutes, no drilling required.

✔

Mounting instructions included.

Optional Attachments

Brave Products, Inc.

800-350-8739

Summary of Contents for VH0622

















































Search results

Summary of Contents for VH0622

Reviews:

Related manuals for VH0622

Brands by name

Popular brands

Brave VH0622, Owner/Operator And Safety Manual

Search results

Summary of Contents for VH0622

Reviews:

Related manuals for VH0622

Brands by name

Popular brands