9
. Put one foot on the base plate of the front
leg to prevent the log splitter from tipping
up and lower the rail to a horizontal
position.
NOTE:
Block the wheels to prevent the base
unit from moving.
10
. Insert the hitch pin through the top, front
hole of the hinge plates, through the rail
and secure it with a hair pin clip on the
opposite side.
11
. Link the ends of safety chains together
with the safety quick-link and tighten the
link’s locknut securely with a wrench.
12
. Place the hitch over the attachment tube,
aligning the bolt holes, and insert the rear
1/2 x 3 inch bolt (A). Install and tighten
the locknut.
Insert the end of quick link into front tube
of the rail assembly and insert a 1/2 x 3
inch bolt (B) through link and hitch.
Install and tighten the locknut.
Brave Products, Inc.
12
800-350-8739
Assembly Instructions
