Clean after Installation completed.
Note: Risk of property damage. Do not support the bathtub by the rim.
Carefully remove the protective film from the bath rim.Never use an
abrasive material to clean surface.
G
MAINTENANCE
SPECIAL STATEMENT
H
The products installation instruction is written in accordance with the latest product information,
following the sustainable development strategy of the Company, to improve continually the produce's
specification, performance etc.,subject to change without notice. (The Company reserves the right to
interpret)
Guangzhou BRAVAT Industrial Co., Ltd.
Service Hot Line: 800-820-5330
Web:www.bravat.com
7
20130715V02
1. Suggest to clean bathtub immediately after drainage complete, as soap, body fat and dirt are easy to be removed at the time before
bathtub dry.
2.Suggest to clean bathtub frequently if using in high hard water area,where high calcium content in water would leave yellow spot after dirt
attaching on bathtub surface.
3.Please use soft cloth with neutral cleaner or soap to clean bathtub, and then wipe its surface to dry.
4.No hard stuff or abrasive stuff like cleaning powder are allowed to clean bathtub, as that would corrode, scratch and dull bathtub surface.
5. Do not allow paint, paint remover like chloroform or any strong organic solvent like acetone in contact with any bath surfaces,or bathtub
surface would be softened, melted or crackle.
6. Do not place flaming cigarette on bath or it would burn bathtub surface.
7.NO bulbs and open fires are allowed to place in bathtub lest bathtub surface is damaged.
Suggestion to remove scratch:
（
1
）
If scratch is slight, spray metal polish or car polish on scratch at first,and then use electric polishing machine to resume glossy surface.
（
2
）
If scratch is deep, use 2000# abrasive paper to remove scratch at first, and then use same method as (1) to resume glossy surface.
